相关噪声中随机信号的Robust检测

本文重点讨论了在平稳ｍ相依噪声中弱随机信号的最佳无记忆Ｒｏｂｕｓｔ检测问题；并且以渐近功效函数为测度准则得到了最大最小无记忆非线性Ｒｏｂｕｓｔ检测器。     

Award for distinguished contribution to education and training in psychology: Jill N. Reich.

Presents the citation, biography, and selected bibliography of Jill N. Reich, one of the 1993 recipients of the American Psychological Association's Award for Distinguished Contribution to Education and Training in Psychology. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

采用信息融合技术的IR／MMW复合导引头的目标跟踪

从误差测量环节入手，基于IR／MMW双模结构，采用信息融合处理技术提高其估计跟踪精度，最终达到降低制导误差，提高武器性能的目的，仿真结果验证了该方法的有效性。     

激光远距作用的机制与效应

本文定量分析激光远距作用的机理并对它们在治癌中的作用作简要的论述。     

关于瞬态应力强度因子和裂纹扩展加速度之间的关系探讨

将动态焦散线法与高速摄影技术相结合,本文记录了高分子材料悬臂梁内裂纹扩展加速、减速过程。一方面,利用动态焦散线可确定扩展裂尖的瞬态应力强度因子;另一方面,利用最小二乘法将裂纹扩展的水平、垂直位移分量拟合成时间(t)的四次多项式,描述了裂纹扩展方向、裂纹扩展加速度以及裂纹扩展加速度与动态应力强度因子的关系。结果表明:裂纹扩展加速度与动态应力强度因子之间存在一定的依赖关系;利用最小二乘法将裂纹扩展的水平、垂直分量拟合成时间(t)的四次多项式,可以对裂纹的扩展方向、加速度进行定量分析。     

美国COMSTAC/AST卫星发射市场预测

隶属于美国联邦航空管理委员会（FAA）的美国商业航天运输咨询委员会（COMSTAC）和商业航天运输管理协会（AST）在每年的5-6月份都对未来10年的商业卫星发射市场进行预测。2001年该委员会对商业同步轨道（GEO）和非同步轨道（NGEO）的卫星需求和发射需求都进行了预测。     

随钻气侵检测仪在胜利油田的应用

简要介绍了随钻气侵检测仪的结构特点、工作原理、现场模拟试验及应用情况。中原油田全尺寸实验井和胜利油田６口井的现场试验及应用结果表明，该仪器能实现早期气侵检测，比常规方法检测到气侵的时间明显提前，对高压气井和复杂地层井控具有重要的现实意义。     

可重复高压灌浆土层锚杆

论述了可重复高压灌浆锚杆的结构构造以及其独特的灌浆工艺，探讨了该类锚杆的承载能力特性。文中还给出了该类锚杆在不同地层中应用的几个实例。     

Pit to crack transition in stress corrosion cracking of a steam turbine disc steel

Long term exposure tests have been carried out on a 3 NiCrMoV steam turbine disc steel in the form of cylindrical tensile test specimens self-loaded to 90% of σ_0.2 and exposed to three environmental conditions, viz. deaerated pure water, aerated pure water, and aerated water containing 1.5 ppm of chloride ion. Pitting occurred in all environments but the density and depth of pits in the chloride-containing medium was markedly greater. No cracking was observed in deaerated pure water but cracks initiated in aerated water between 13 and 19 months and in less than 7 months in aerated 1.5 ppm Cl⁻ solution. The probability of a crack initiating from a pit of specific depth in aerated solution could be described well by a Weibull function. Profiling of pits and cracks in the disc steel tested in aerated 1.5 ppm Cl⁻ solution showed that there while there were many cracks with a depth greater than that of the corresponding pit the depth of some cracks was smaller than that of the corresponding pit, suggesting that cracks do not necessarily initiate from the bottom of the pits. The growth rate of short cracks emerging from pits appeared greater than that of long cracks in fracture mechanics specimens.     

Thermodynamic and kinetic consideration on the corrosion of Fe, Ni and Cr beneath a molten KCl-ZnCl2 mixture

Thermogravimetric (TG) experiments have been carried out to study the kinetics of hot corrosion of Fe, Cr and Ni, covered by a molten KCl-ZnCl₂ mixture of a composition close to the eutectic (50 mol% KCl-50 mol% ZnCl₂). Furthermore binary and ternary phase diagrams were calculated in order to describe the corrosion process. The tests were conducted at a temperature of 320 °C in an atmosphere consisting of argon and oxygen. For iron different stages are observed in a TG curve. They can be attributed to the different reaction steps of iron chloride formation (incubation phase), oxide precipitation (linear stage) and scale formation (parabolic or logarithmic stage). Based on these observations a model, described by Spiegel [A. Spiegel, Molten Salt Forum 7 (2003) 253], is confirmed. For Cr and Ni these stages are not observed. At 8 vol% O₂ only slight oxidation of Cr and Ni was observed accompanied by evaporation of the salt deposit. At 16 vol% O₂ the rate of oxidation increases and the experiments yield a curve that is either parabolic or logarithmic for both Ni and Cr. As a result it is shown that the solubility of iron chloride in the KCl-ZnCl₂ melt is higher than the solubility of nickel chloride and chromium (III) chloride in the KCl-ZnCl₂ melt. This enables a higher diffusibility of iron chloride to the upper region of the melt where a higher oxygen partial pressure (p(O₂)) is present leading to a higher oxidation rate of iron.